GET A QUOTE TODAY
(610) 466-1440
Maintenance and Parts Instructionals
In Depth Machine instructional
videos on the Image Fillers app
Gain access to the app when you buy a machine
Maintenance and Parts Instructionals
In Depth Machine instructional
videos on the Image Fillers app
Gain access to the app when you buy a machine
How to replace the slow speed bearing housing
Image Fillers Inc.
How to Adjust the Spinner Plate For Accurate Filling
Image Fillers Inc.
How to Remove and Reinstall the Clutch Brake Motor
Image Fillers Inc.
How to Correctly Align your Auger to Avoid Premature Wear and Tear
Image Fillers Inc.
Image Fillers Fully Integrated Packaging Line
Image Fillers Inc.
Beginning of Imagefillers Inc.
1996
Image Fillers Inc.
McCormick Spice Line Dual Head Filler
Image Fillers Inc.
Filling Coffee With Image 3500 Servo Auger Filler
Image Fillers Inc.
Perfect Solution Filler Demo - Image Fillers
Image Fillers Inc.
Fill Liquids With Your Powder Filler
Image Fillers Inc.
How to - Proper Distance Between Spinner Plate and Funnel
How to Set the Correct Distance from the Spinner Plate to the Funnel for Accurate Filling
Setting the correct distance between the spinner plate and the bottom of the funnel is crucial for ensuring accurate fills in free-flow machines.
Follow these steps to adjust the spinner plate:
Steps:
Loosen the auger shaft bolt by reaching into the hopper.
Adjust the spinner plate by pulling the auger shaft up or down until the spinner plate forms a 45-degree angle with the bottom of the funnel (known as the angle of repose).
This is what the spinner plate should look like at a 45 degree angle.
This is too high.
This is too low.
Once the correct angle is set, tighten the auger shaft bolt.
Why 45 Degrees?
The 45-degree angle is essential for accurate filling. If the angle is off, your servo motor auger filler won't deliver the precision itβs designed for.
View our machine lineup at: ImageFillers.com/product-page
Copyright Β© 2024 Image Fillers Inc. All rights reserved.
Made In The United States
